PRISMJET 54 Gen2 - Page 58

Before using PrismJET 54 Gen2 OPERATION MANUAL
68 3.5 Test print
5. Press the [Enter] key on the operation panel.
• Start performing Test Print for the selected item.
TIP
Refer to the following for details on each of the print list items.
3.5.1 Nozzle check to 3.5.5 Palette print
6. Repeat step 4 to step 5 when performing test print for other items.
7. Press the [Cancel] key on the operation panel to exit from test print.
• The operation panel returns to Normal.
• The procedure for test printing is complete.