PRISMJET 54 Gen2 - Page 91

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.6 Adjust Print 101
k. Press the [Enter] key on the operation panel.
• “Adj.1: Confirm Ptn.” is displayed on the operation panel.
• The display enters the Adjust Print menu.
5.1.1.1.3 Adjust Print menu
3. Press the [Enter] key on the operation panel.
• “Warming Up Skip ->E” is displayed on Operation panel.
CAUTION
• While “Warming Up” is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.8 Start Printing during Warm up
• A confirmation pattern for print quality adjustment is printed.
(Starts printing after warming up is complete.)