2.3 Intended Use
Intended Use
The device is intended for measuring and regu‐
lating liquid media. The designated measured vari‐
ables appear on the device's display and are abso‐
lutely binding.
Only use the device in accordance with the tech‐
nical data and specifications outlined in these
operating instructions and in the operating instruc‐
tions for the individual components (such as sen‐
sors, fittings, calibration devices, metering pumps,
etc.).
Any other uses or modifications are prohibited.
Time constant of > 30 seconds
–
The controller can be used in processes, which
require a time constant of > 30 seconds.
Safety and responsibility
13
To Next Page
Loading...
