Table of contents
1 Functional description........................................................... 6
1.1 Nameplate.................................................................. 10
2 Safety and responsibility..................................................... 11
2.1 Labelling of Warning Information................................ 11
2.2 General safety information.......................................... 12
2.3 Intended Use.............................................................. 13
2.4 User qualification........................................................ 14
3 Storage and transport......................................................... 15
4 Installation and assembly.................................................... 16
4.1 Ambient Conditions for Operation............................... 16
4.2 Scope of Delivery........................................................ 16
4.3 Installation................................................................... 16
4.3.1 Installation on the wall............................................. 17
4.3.2 Opening/closing the transparent cover.................... 17
4.3.3 Opening/closing the terminal cover......................... 18
4.3.4 Electrical installation................................................ 18
4.3.5 Replacing the internal fuse...................................... 18
4.3.6 Primary power supply.............................................. 19
4.3.7 Measuring input connections................................... 20
4.3.8 Connectors for self-fed relay outputs (PO1 and
PO2)........................................................................ 26
4.3.9 Potential-free relay connections (FO1 and FO2)..... 27
4.3.10 Electronic relay outputs (RO1 and RO2)............... 28
4.3.11 4 ... 20 mA output connectors (AO1 ... AO4)......... 28
5 Commissioning................................................................... 30
6 Operating concept and operation........................................ 31
6.1 Displaying details on the “Small x6” channels............ 36
6.2 Displaying details on the “Large x3” channels............ 42
6.3 Detailed display of a channel...................................... 48
6.4 Input mode.................................................................. 51
7 Communication programming instructions.......................... 58
7.1 Power supply output connector (PWR)....................... 58
7.2 RS485 communication bus connections..................... 58
7.3 Internal GSM modem connector................................. 60
7.4 Ethernet modem connector........................................ 61
7.5 Setting up the communication.................................... 61
7.5.1 Modbus configuration [1731]................................... 62
7.5.2 Wi-Fi configuration [2731]........................................ 63
7.5.3 Ethernet modem configuration [3731]...................... 65
7.5.4 Internet and web server configuration [4731].......... 65
7.5.5 MYSYCLOPE configuration [5731].......................... 66
7.5.6 Ethernet modem configuration [6731]...................... 67
7.5.7 Modbus slave configuration [7731].......................... 69
7.5.8 Communication information [8731].......................... 69
7.6 Modbus communication register................................. 70
7.7 Data formatting........................................................... 76
8 Setting measuring and control parameters......................... 79
8.1
‘SET UP’
programming screen.................................. 79
Table of contents
3
To Next Page
Loading...
