ProMinent Splash Control Pro 2 - MYSYCLOPE Configuration [5731]

A3058
Web parameter
Automatic time setting (internet connection needed)
Internet
web service
Adjust SNTP server # 2
Adjust SNTP server # 1
Fig. 62: Internet and web server configuration [4731]
Automatic time setting
n When this option is enabled, your regulatory authority will peri‐
odically check the time on the internet using the SNTP pro‐
tocol. Your regulatory authority therefore needs to be con‐
nected and have internet access.
Adjusting SNTP server # 1
n Your device already has an SNTP server address. However,
you can adapt the servers used for the setting and enter the
first address here.
Adjusting SNTP server # 2
n While setting, your device attempts to reach the second server,
if server #1 cannot be reached, if the checkbox is highlighted
and the address entered.
7.5.5 MYSYCLOPE configuration [5731]
Press MYSYCLOPE to open the following screen.
Communication programming instructions
66