ProMinent Splash Control Pro 2 - Menu: Configuration and Installation of the CONDITIONS

A3134
Analogue output settings
pH assignment E01
Outside the range
Error: Lower
Limitations: None
Special flows
Output range 4 ... 20 mA
AO1
Fig. 87: Output 4 ... 20 mA in transfer mode
8.1.4 Menu: Configuration and installation of the CONDITIONS
The ‘CONDITIONS’ menu provides access to the configuration of
the operating conditions, which are used to control parameter ope‐
ration.
The screen shows the list of configured and conditioned parame‐
ters. You can change the configuration of the conditions applied by
pressing a parameter used.
A3135
Condition settings
Conditional parameters
Not used
Not used
Not used
Temperature
Free chlorinepH value
Not used
Not used
Fig. 88: Menu: Configuration and installation of the CONDITIONS
Setting measuring and control parameters
92