ProMinent Splash Control Pro 2 - Settings - ALARMS Menu

8.3 ‘Settings’ - ‘ALARMS’ menu
The ‘ALARMS’ menu lets you set the parameter operating mode
for the alarms.
The screen shows the configured settings. You can configure the
alarms by pressing an active parameter.
A3154
Alarm threshold settings
Parameter with alarm threshold values
Temperature
Free chlorine
pH value
Fig. 103: ‘Settings’ - ‘ALARMS’ menu
A3155
Alarm threshold settings
E01 pH value
Metering stop with alarm
Threshold
Threshold
Upper threshold alarm active
Time delay
Hysteresis
Lower threshold alarm active
Fig. 104: Setting individual parameters (here E01)
Setting measuring and control parameters
101