Main group Subgroup Function
6 Measured value lower than can be displayed on the scale.
7 Measured value higher than can be displayed on the scale.
8 Measured value cannot be displayed.
9 Measured value cannot be measured. Technical alarm
III: Metering status and capacity
10 Threshold low / threshold high
11 Measured value
12 Lower limit of metering shutdown, if set
IV: Notification area
13 Polarisation is in progress.
14 The sensor is not operating.
15 The sensor must be maintained and serviced.
16 The sensor signal is unstable and fluctuating.
Alarm thresholds
17 OFF if not programmed
Operating concept and operation
45
To Next Page
Loading...
