Main group Subgroup Function
7 Measured value higher than can be displayed on the scale.
8 Measured value cannot be displayed.
9 Measured value cannot be measured. Technical alarm
III: Alarm status
10 Threshold low / threshold high
11 Measured value
12 Lower limit of metering shutdown, if set
IV: Compensation status and capacity. If set.
13 Compensation status and capacity. If set.
Compensation percentage as a %. If the flow is set in the compensation
parameter.
Additional information
14 Metering percentage, OFF if not programmed
15 Metering shutdown threshold, OFF, if not programmed
16 Alarm threshold, OFF if not programmed
Operating concept and operation
47
To Next Page
Loading...
