PLX51-PBM SD Card
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway User Manual
ProSoft Technology, Inc. Page 100 of 196
Figure 4.5 – Configuration Export for SD Card
IMPORTANT: The filename of the configuration file must not be changed. The specific module will use
only the configuration that is valid (e.g. the PLX51-PBM will only use the PBM configuration file).
IMPORTANT: If more than one configuration file, with different configuration signatures, of the same
product is on the SD Card then only the last configuration will be used.
To Next Page
Loading...
