PLX51-PBM Operation
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway User Manual
ProSoft Technology, Inc. Page 127 of 196
Below are some basic definitions for certain alarm parameters:
1 – Diagnosis Alarm
2 – Process Alarm
3 – Pull Alarm
4 – Plug Alarm
5 – Status Alarm
6 – Update Alarm
Alarm Specifier (Bit 0 to 1)
0 – No further differentiation
1 – Fault occurred and slot it not ok
2 – Fault disappeared, and slot is ok
3 – One fault disappeared, and slot is not ok
To Next Page
Loading...
