Maintenance
5-12
5.3 Installing the Parts of the Fuser Kit
The Fuser Unit has to be replaced at regular intervals.
It is only allowed to use a Fuser Unit which has been released for the printer.
The Fuser Unit is part of the Fuser Kit which consists of:
$
a Fuser Unit (1)
$
a Cleaner Felt incl. Fuser Cleaner Platen (2) (if not mounted already insert it
into the Fuser Unit)
Note:
Take away the safety foil (3) before inserting the Fuser Unit!
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...