PSI PP4050 XP - Paper Extended; Paper Selection; Paper Path Select

Explanation of Individual Menu Items
4-13
$
PAPER EXTENDED
With
PAPER EXTENDED
set to
NO
printing into the border areas of
A4
and
LETTER
pages is not possible which is in line with the PCL5 definition.
However, for compatibility to existing applications which use the border
areas
PAPER EXTENDED
can be set to
YES
. Now the entire physical page
is printable at which the default cursor position remains unchanged.
With format CUSTOM the complete page can also be printed but the default
cursor position is always the first dot at the upper left corner.
$
PAPER SELECTION
Selecting the paper format (A4, LETTER, CUSTOM) from the host can be
done with PCL or PJL commands. The execution of this commands can be
influenced by the parameter PAPER SELECTION.
RECOGNIZE
- A change of
PAPER
is possible via interface by
means of PCL- or PJL-commands.
ONLY PJL
- Only via PJL-command (default)
IGNORE
- Any command to change the paper format will be
ignored; the paper format can only be modified via
the operator panel.
Note:
PAPER SELECTION
by the printer driver needs the setting
RECOGNIZE
or
ONLY PJL
.
The PSi printer driver for Windows® uses PCL and PJL
sequences.
$
PAPER PATH SELECT.
(Paper Path Selection)
With this parameter it is possible to recognize or ignore the change of the
parameter
SOURCE
and
DESTINATION
via the interface. Factory default is
RECOGNIZE
.
RECOGNIZE
- A change of the parameters
SOURCE
and/or
DESTINATION
is possible via interface by means
of PCL- or PJL-commands. (See Appendix A
Paper
Source and Exit Selection
).
IGNORE
- Any command to change the parameter will be
ignored.
Note:
PAPER PATH SELECTION
by the printer driver needs the setting
RECOGNIZE
.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es