Appendix A Programming Guide
A-3
A-1.3 Paper Path Control
The paper path for the printer can be controlled by software. This can be done
either by PJL or by PCL commands which have to be sent at the beginning of
an application file.
Note:
The acceptance of PJL or PCL commands to select the paper format
and paper path depends on the configuration of PAPER SELECTION
and PAPER PATH SELECT.
A-1.4 Semigraphics Support under SAP R/3
To increase the printer performance when the printer is running under SAP R/3
PSi provides a printer specific SAP R/3 device type. These device type makes
use of the special semigraphic line draw elements. (see chapter
A-4 Support of
Semigraphics for SAP/R3
)
The SAP R/3 device type ZPSI4050.PRI including installation description can
be downloaded from the PSi homepage: www.psi-laser.com
A-1.5 EURO Symbol Support
The printer supports printing of the EURO symbol as printer resident character
within the following code tables (see also Appendix B):
$
ISO 8859 / 15 LATIN 9
$
PC - 858 Multilingual
$
SYMBOL
$
WINDINGS
Note:
The EURO symbol is supported in combination with a restricted number
of printer typefaces.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...