PSI PP4050 XP - To Confirm and Save Selection

Printer Operation
2-8
Now you are at the Subfunction level. Movement in both directions is possible
by:
$
pressing the quick set up wheel
to enter the next lower level
$
pressing the key
to enter a higher level.
If the selection is e.g.
PCL MENU
the display will indicate:
PCL MENU
FONT NUMBER
PITCH
SYMBOL SET
The next, but not visible items are:
LINE SPACING
TOP MARGIN
LEFT MARGIN
RIGHT MARGIN
TEXT LENGTH
PERF. SKIP
$$ COMMANDS
Now select the requested menu item of this menu (for example
PERF. SKIP
) by
turning the with the quick set up wheel
and press the same buttom to enter
the lowest level.
At the last level to select/confirm values, the asterisk (*) at the right indicates the
actual selection.
PERF. SKIP
OFF
*
ON
By turning the quick set up wheel
to the left or right you are able to change
from OFF to ON.
2.2.2
To Confirm and Save Selection
$
press
; the confirmed value is displayed with an asterisk (*) in the last
position.
Note:
All newly selected values must be confirmed and saved immediately
by pressing this key!
The Menu Mode is left by pressing the
key.
Note:
All actual parameter settings can be printed with the function
SELF TEST
in the
TEST MODE
.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es