PSI PP4050 XP - Alarm Bell; Language; Menu Accesss

Explanation of Individual Menu Items
4-24
$ ALARM BELL
Any error that occurs during a print operation is reported by a corresponding
error message on the display, additionally the buzzer in the operator panel
electronics is activated and the panel LED flashes. The signals can be
stopped by either pressing any key on the panel or by opening the cover.
The default setting is
ON
. To disable this function set the value to
OFF
.
Note:
The two short signals during power on are always active.
$
LANGUAGE
Selects the language of the menu.
Default is
ENGLISH;
available are:
ENGLISH, FRANCAIS, ESPANOL and DEUTSCH (German)
$ MENU ACCESS
The menu
CONFIG MENU
has been extended by the new function
MENU ACCESS
, defining the access rights to various submenus. The
access rights could defined being
ALL
,
PROFILE ONLY
, or
NONE
. The
locked submenus aren’t displayed on the panel. However, configuration
changes by means of PJL commands are possible.
The access rights can be changed with the following combination of operator
panel keys:
$
Choose the new access right in
MENU ACCESS
.
$
Choose the option and save it with the key [
] .
$
Press
ESCAPE
[
] within the next two seconds.
$
Save with the key [
] once more.
Note:
A wrong key sequence results in cancelling the current trial and the
complete sequence has to be started again.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es