PSI PP4050 XP - Line Spacing; Top Margin; Left Margin; Right Margin

Explanation of Individual Menu Items
This menu item is only displayed if PAPER size
CUSTOM
is selected.
1)
4-18
$
LINE SPACING
The distance between print lines is determined in lines/inch; selectable
values are: 1,2,3... 48 lines/inch. Default is 6 lines/inch.
$
TOP MARGIN
1)
This parameter defines the number of lines between the top edge of the page
and the first print line. Any value from 0 up to 999 lines can be choosen;
factory default value is 0.
$
LEFT MARGIN
1)
This parameter defines the displacement of the first print position of a print
line from the left border of the printable area. Any value from 0 up to 999
positions can be selected; factory default value is 0.
$
RIGHT MARGIN
1)
The parameter value defines the distance of the last print position within a
line from the left border of the logical page. Any value in the range from 0 up
to 999 and
MAXIMUM
can be selected; factory default is MAXIMUM.
Right Margin should only be set to a defined value if the application requires
a text formatting by the printer.
Note:
Setting
RIGHT MARGIN
in applications wich download fonts or use
landscape orientation may cause loss of characters in a line.
$
TEXT LENGTH
1)
The parameter defines the number of lines on a page; exceeding this limit
leads to a transition onto the next following page. Any value from 0 up to 999
can be selected; factory default value is 72. The parameter is ignored if
PERF. SKIP
=
OFF
was selected.
$
PERF. SKIP
(PERFORATION SKIP)
1)
In case of
PERF. SKIP
=
ON
the printer takes the values of TOP MARGIN
and TEXT LENGTH into account on each page.
If
PERF. SKIP
=
OFF
is selected the printer prints over the perforation. At the
transition onto a next following page the values of TOP MARGIN and TEXT
LENGTH are ignored. Factory default selection is OFF.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es