PSI PP4050 XP - Menu Mode SELECT PROFILE; Menu Mode CHANGE PROFILE; Paper Menu; Paper

Explanation of Individual Menu Items
4-3
4.1
Menu Mode SELECT PROFILE
Activation of one out of 50 Profiles
4.2
Menu Mode CHANGE PROFILE
Configuration of one specific Profile.
4.2.1
Submenu PAPER MENU
$
PAPER
A choice out of three different paper sizes can be made:
A4
LETTER
CUSTOM
.
If
A4
or
LETTER
is selected the printer automatically sets all parameters
which define the allocation of the print image on a page. Those parameter
values are in accordance to the PCL5 definition.
In case of
A4
the contents of an A4 page is printed asymmetrically onto a
12 inch form which leads to a larger bottom margin than top margin.
In case of
LETTER
the page contents are printed onto an 11 inch form.
Note:
If the paper size is changed from one format into another the printer
selects the default values of the format describing parameters
(PAPER LENGTH, IMAGE WIDTH etc.) which belong to the choosen
paper size.
Paper size (PAPER) can be selected at the control panel or by
means of PCL- or PJL-commands from the host system (see also
PAPER SELECTION
).
There are restictions in the paper width if the fomat
CUSTOM
is in
use and the
TWO-UP MODE
is activated. See the table on the next
page.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es