PSI PP4050 XP - 1 Installing the Printer and Intelligent Paper Stacker; Requirements to the Location of the Printer; Environmental Conditions

1-1
1. Installing the Printer and intelligent Paper Stacker
1.1 Requirements to the location of the printer
In this chapter the preconditions are described concerning the environment, the
physical prerequisites, and the demand for space which are required for
installation of the printer.
1.1.1 Environmental conditions
$ Temperature and Humidity
The following table shows the values of temperature and relative humidity
which are specified for the printer and its consumables.
Temperature Relative Humidity
Print operation * + 19 to + 23°C 33 to 47%
Optimum range + 68 to + 73°F
Print operation + 15 to + 30°C 25 bis 55%
Extended range + 56.5 to + 86°F
Transport and Storage - 20 to + 40°C max. 95%
of the printer - 4 to + 104°F (at + 40°C or + 104°F)
Transport and Storage - 20 to + 40°C max. 95%
of the consumables ** - 4 to + 104°F (at 40°C or 104°F)
Storage of fanfold + 19 to + 23°C 33 to 47%
paper + 68 to + 73°F
* The photoeletrical process in a laser printer is influenced by the climatic
conditions of the environment. The herewith specified values define a
climate in which an optimal print quality is ensured. Operating the printer
outside this range may lead to a reduction of the print quality.
** It is recommended to store the consumables at a cool and dark location.
$ Altitude
The printer can be used at an altitude up to 2,135 m (7,000 ft.).
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es