PSI PP4050 XP - A-2.1.4 List of Supported PJL Variables and Values

Appendix A Programming Guide
A-12
A-2.1.4 List of Supported PJL Variables and Values
The following variables can be programmed by the PJL commands:
$ @PJL SET  variable  =  value 
$ @PJL DEFAULT  variable  =  value 
PJL VARIABLE VALUES
PROFILE 1, 2, 3, ....., 50
PAPER A4, LETTER, CUSTOM
TWOUPMODE ON, OFF, IDENTICALCOPY
TWOUPEXTENT 0, 1, 2, ....., 1600
TWOUPSEQUENCE LEFTRIGHT; RIGHTLEFT
PAGELENGTH 3, 3 1/6, ....., 24
in steps of 1 / 6 or 1 / 4 inch
Note:
value 3 1/6 programming is 3<SP>1/6
LENGTHFACTOR 1, 2, 3, ...., 20
IMAGEWIDTH 0.5, 0.55, ....., 17
in steps of 0.05 inch
PAPERSOURCE LOWER, UPPER
PAPERDESTINATION BOTTOM, BOTTOMCUT
LENGTHFACTOR 1, 2, 3, ...., 20
ORIENTATION PORTRAIT, LANDSCAPE
LANDSCAPEMODE REVERSE, PCLCOMPATIBLE
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es