PSI PP4050 XP - Typical Paper Properties for Laser Printer

Paper Specification
8-6
8.4.2
Typical Paper Properties for Laser Printers
Description
Specifications
Applicable
Standard /
Method
curl
5mm (0.2 inch);no diagonal curl at
conditioned (23 ± 2)

C and
(15 ± 5) % RH
stability of
maximum 0.8%
dimension cross
in heat chamber at 110

C for
to paper path
20 minutes
electrical surface
10
to 10
ohms/square inch
PTS-P: 101/84
resistivity
(conditioned at 23

C and 50% RH)
8
10
electrical volume
< 10
ohms/square inch
DIN 53 482
resistivity
(conditioned at 23

C and 50% RH)
10
high-temperature
< 0.4 %
DIN 54 354
stability
raise dust
no loose parts; paper should be
DIN 53 109
free from dust
fusing
must not scorch, melt, offset, or
FOGRA-Method
compatibility
release hazardous emissions when
heated to 190

C (395

F) for
nearly 0.1 second
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es