Appendix A Programming Guide
A-30
$
Bar code type
This command selects a bar code type:
ESC * z P1 V default = 0
P1 = 0 Code 39
P1 = 1 2 of 5 industrial
P1 = 2 reserved
P1 = 3 reserved
P1 = 4 2 of 5 interleaved
P1 = 102 EAN 8 SC2
P1 = 106 EAN 8 SC6
P1 = 109 EAN 8 SC9
P1 = 122 EAN 13 SC2
P1 = 126 EAN 13 SC6
P1 = 129 EAN 13 SC9
P1 = 142 UPC-A SC2
P1 = 146 UPC-A SC6
P1 = 149 UPC-A SC9
P1 = 162 UPC-E SC2
P1 = 166 UPC-E SC6
P1 = 169 UPC-E SC9
P1 = 180 Codabar
P1 = 181 MSI
P1 = 188 Code 93
P1 = 200 Postnet
P1 = 210 Code 128
P1 = 220 RM4SCC/KIX
Note:
EAN and UPC code selection supports ADD2 and ADD5
extensions by sending those additional digits.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...