Explanation of Individual Menu Items
$
$
$
In addition to the mechanical page counter the firmware has incorporated an
individual software page counter which count the usage grade for each
consumable. This information is calculated in percentage of the total lifecycle
of the device and is displayed in the info menu and on the configuration test
page. When the end of the lifetime is reached a value of 100% is indicated.
After replacing the worn out consumable the user must reset the associated
counter. The associated counter can be reset by
The lifetime of a consumable is determined by the rotation
and the movement of the mechanical parts. A stop of the
print operation leads to further movement of the paper due to
retraction into the park position.
After replacing the Developer Unit, the PC Cartridge, or the
Fuser Unit the above mentioned Reset functions have to be
Following settings are possible:
$
$
$
$
$
$
$
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...