Maintenance
5-14
5.4 Replacement of the PC Cartridge (OPC)
If the print quality gets worse the PC Cartridge (8) should be replaced.
It is only allowed to use a PC Cartridge that has been released for the printer.
Note:
$
The PC Cartridge is very light-sensitive, so it is wrapped up in
lightproof foil. Carefully remove the drum from its foil container.
$
Please do not touch the green part of the PC Cartridge with your
fingers. Oil and dirt degrade print quality.
$
Do not expose the light-sensitive PC Cartridge to room lighting or
sunlight any longer than necessary.
$
Press first . OFFLINE will be displayed.
$
Open the front (21) cover.
$
Press the lever (26) to the top to slide the Developer Unit away from the PC
Cartridge.
$
Remove the connector (8A).
$
Press lever (8B) down and pull the PC Cartridge (8) about
-
out of the
housing and grasp the grip (8C) with the other hand and pull it toward you
off the printer housing.
$
Insert a new PC Cartridge by using the upper and lower iron band guides
and push it into the printer until you hear a click.
$
Mount the connector (8A).
$
Fix the new PC Cartridge by pressing down the lever (26).
$
Close the front (21) cover.
Note:
Change to the OFFLINE mode and reset the OPC INFO (see
BASIC SETTINGS
CONFIG MENU
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...