Preface
XVI
Safe Energy
The PP 4050 / PP 4060 printer has a special feature to save power. After a
specified period of inactivity, the printer changes to a low power state. When a
print job is received, the printer resumes the operating mode. This function is
c
hangeable in the Configuration Menu with the item POWER SAVE. Standard
setting is 15 minutes.
Conventions Used in this Guide
The following conventions are used:
Bold Headlines and important information.
Note:
Contains special advice to facilitate handling.
Caution:
Contains important information to prevent damage
of the equipment.
[ENTER] Key functions are always depicted in brackets or
indicated by the corresponding symbol e.g. .
The use of LEFT and RIGHT always assumes you are viewing the front i.e. the
control panel of the printer. For instance, the paper input is at the LEFT side of
the printer.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...