PSI PP4050 XP - How to Start the SELF TEST

Configuring the Printer
3-4
3.2.1 How to Start the SELF TEST
Key Display
1. Switch the printer ON ONLINE (1) (after initialisation)
16.00 x 12 INCH
LOWER --> BOTTOM
2. OFFLINE (1)
SELECT PROFILE
...
3. turn until OFFLINE (1)
TEST MODE
...
4. press the button TEST MODE
TEST MENU
INFO MENU
5. press the button TEST MENU
PANEL TEST
SELF TEST
CONT SELF TEST
6. turn to the right TEST MENU
SELF TEST
CONT SELF TEST
CONFIG. PRINT
7. press the button TEST MENU
SELF TEST *
...
The printer starts to print the self test.
The printer returns to the operating mode after pressing .
Note:
If the printer is in the ONLINE mode press , select CUT FORM, and
press to cut the page!
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es