Appendix A Programming Guide
A-16
A-3 List of Supported PCL5 Control Functions
A-3.1 Job Control Commands
JOB CONTROL Description
COMMANDS
ESC % - 12345 X Universal Exit / Start of PJL
Change to PJL Language Interpretation Mode
Reset the printer like performing a Reset
command
Print all data received before the UEL
command
ESC E Reset
Reset to PJL Current Environment
Printing of any partial pages
Deleting of all temporary download resources,
as macros, fonts, and patterns
ESC &
O
# X Number of Copies
Number of printed copies for each page
ESC &
O
# U Left Offset Registration
Position of the logical page across the width of
the physical page
ESC &
O
# Z Top Offset Registration
Position of the logical page along length of the
physical page
ESC & u # D Unit of Measure
Measure for PCL unit cursor movements
ESC &
O
# G Paper Exit Selection
(Private Command) # = 12 : Lower exit, each page is cut
Parameters:
# = 1 : Upper exit, each page is cut
# = 2 : Lower exit (Stacker) without
cutting
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...