PSI PP4050 XP - Job Separation; Tractor Change Cut

Explanation of Individual Menu Items
4-21
$
JOB SEPARATION
Many application programs terminate a printjob with the PJL command
EOJ
.
The firmware is supporting this command as well and allows to link the EOJ
recognition to the set up parameter
JOB SEPARATION
(
ON
/
OFF
) in the
GENERAL MENU.
If set to
ON
and the last page of a job is printed, a cut is performed, printing
is stopped and the paper is removed into the parking position.
Factory default is
JOB SEPARATION = OFF
.
This setting means that neither
automatic feeding into the cut position, and no automatic cutting is
performed. It is appropriate for batch output of continuous forms.
$
TRACTOR CHANGE CUT
The automatic cut function after selecting a new
SOURCE
(e.g. from LOWER
to UPPER) or a new
DESTINATION
(e.g. from BOTTOM to TOP) can be set
to
OFF
. Factory default is
ON
.
ON
-
The automatic cut function is active.
OFF
-
After a change of
SOURCE
or
DESTINATION
the printer switches
into the
OFFLINE
mode and the display shows the message
11 REMOVE PAPER
. Press
to enter the menu mode and
activate
CUT FORM
. The paper will be cutted and move backwards
to parkposition.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es