A-1
Appendix A
Programming Guide
The printer supports the PJL Printer Job Language and PCL5 Printer Language.
All the printer´s unique feature and functions can be controlled by the
application software via PJL or PCL5 commands.
Among those functions are the following:
$
Job Control Support using profiles see paragraph A-1.1
$
Support of various paper sizes see paragraph A-1.2
$
Paper path control see paragraph A-1.3
$
Support of semigraphics for application under SAP/R3 see paragraph A-1.4
$
Euro symbol support for a restricted number of code pages
and type faces see paragraph A-1.5
$
Support of Logical and Physical Pages see paragraph A-1.6
$
Support of Job Separation see paragraph A-1.7
$
Printer set up configuration via PJL commands see chapter A-2
$
Printer set up configuration via PCL5 commands see chapter A-3
$
Support of 13 resident bar codes by privat PCL5 commands see chapter A-5
Note:
For more information regarding PJL and PCL5 programming please refer
to the
$
PJL Printer Job Language (5961-0704)
$
PCL5 Printer Language Technical Reference Manual (5961-0509)
published by Hewlett-Packard Company.
®
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...