Appendix A Programming Guide
A-14
The following variables can be programmed by the PJL command:
$
@PJL DEFAULT
variable
=
value
PJL VARIABLE VALUES
POWERSAVE OFF, 15, 30, 45, 60
KEEPTEMPHIGH ALWAYS, 0.5, 1, ....., 60 (in steps of 0.5 sec)
ALARMBELL ON, OFF
LANG ENGLISH, GERMAN, FRENCH, SPANISH
MENUACCESS ALL, PROFILESONLY, NONE
Note:
These variables can not be used by the PJL COMMAND SET.
ACTIVEKEYIGPVn
n=1...8 (License Keys for opt. IGP Emulation)
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...