PSI PP4050 XP - Page 63

Configuring the Printer
Paper Menu Value / Parameter
3-11
PAPER EXTENDED NO *
YES
PAPER SELECTION ONLY PJL *
RECOGNIZE
IGNORE
PAPER PATH SELECT. RECOGNIZE *
IGNORE
FUSER TEMP. MIDDLE *
HIGH
LOW
TONER DENSITY LOW
MIDDLE *
HIGH
VER SHIFT 0/100 INCH *
( Range: -50/100 up to +200/100 inch )
HOR SHIFT 0/100 INCH *
( Range: -50/100 up to +50/100 inch )
CUT SHIFT 0/100 INCH *
( Range: -50/100 up to +50/100 inch )
INIT LINE REGISTR. 1 *
( Choice: 1 up to 6 patterns)
1 = No correction
2 = Displacement on the first 2 pages by 0,5 mm
3 = Displacement on the first 2 pages by 1,0 mm
4 = Displacement on the first 2 pages by 1,5 mm
5 = Displacement on the first 5 pages up to 0,5 mm
6 = Displacement on the first 5 pages up to 1,0 mm
STITCHING POINT
0/10 INCH *
( Range: -35/10 up to +35/10 inch )
BRIGHTNESS
5
*
(Choice: value 1 up to 9)
Only availiable with Article-No:
- 8707 400 020xx
- 8707 410 010xx
Only availiable with Article-No:
- 8707 400 030xx
- 8707 410 030xx
- 8707 410 032xx
- 8707 410 012xx
Only availiable with Article-No:
- 8707 400 030xx
- 8707 410 030xx
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es