4–Installation in a Linux Environment
Installing Software
FE0254601-00 A 4-15
6. In the third column, select the version of the Linux Operating System that is
installed on the server, and then click Go (Figure 4-11). For example, in
Figure 4-11, Linux Red Hat (64-bit) is selected for a QLE8152 adapter.
Figure 4-11. Select an Adapter and a Linux Operating System
7. Under Drivers, click the download link Converged Network Adapter
Networking Driver (Figure 4-12).
Figure 4-12. Download the Networking Driver
8. Read the QLogic license agreement, and then click Agree.
9. When prompted, click Save to save the compressed driver file to a
temporary location on the hard drive. The compressed file contains the
source for the QLogic networking driver. The file name has the following
format:
qlge_x.x.x.xx-ddmmyy_xx_x.x.xx.tgz
To Next Page
Loading...