Qlogic 8100 Series

3–Installation in a Windows Environment
Verifying Driver Installation
3-32 FE0254601-00 A
c. In Device Manager, under Network Adapters (for NIC Drivers) and
Storage Controllers (for FCoE Drivers), right click on a
QLogic-labeled entry, and then click Properties (Figure 3-43).
Figure 3-43. Network Adapters and Storage Controllers
d. In the Properties dialog box, click the Driver tab and find the field
Driver Version field. Figure 3-44 shows an example of a NIC adapter
driver (version 1.0.1.0) and an FCoE adapter driver (version 9.1.8.26).
Figure 3-44. NIC and FCoE Adapter Driver Properties
3. Understand the LED scheme for QLogic 8100 Series Adapters. For
information about QLogic 8100 Series Adapter LEDs, see Appendix A.