3–Installation in a Windows Environment
Firmware Upgrades
3-36 FE0254601-00 A
3. Expand the physical Port 1, select the FCoE port, and then select the VPD
tab (Figure 3-48) in the right pane. The Flash Image Version appears at the
bottom of the Port Vital Product Data (VPD) list.
Figure 3-48. Displaying the Multi-boot Image Version
Upgrading the Firmware/Boot Code
Using QConvergeConsole GUI or QConvergeConsole CLI
Firmware is updated for the adapter and not for individual ports. For a multiport
adapter, firmware can be updated only through the first port.
To update firmware using the QConvergeConsole:
1. Expand the physical Port 1 and select the FCoE port.
2. In the right pane, click the Utilities tab.
To Next Page
Loading...
Need help?
General