8–Configuring FCoE in a Linux Environment
Using the QLogic Linux Utilities
8-46 FE0254601-00 A
HBA Collect Utility
The HBA Collect utility creates a compressed file containing debugging and
configuration options from the RHEL 5 host. Run this utility when requested by
QLogic Technical Support.
The HBA Collect utility collects the following information:
Driver-related information including debug messages in
/var/log/messages, information in /proc/scsi/scsi, information in
/etc/qla2xxx.conf, and relevant information about QLogic FCoE driver
configurations
RHEL 5 version information
System configuration information including a list of PCI devices, device
information, CPU and memory information, partitions, kernel and command
line parameters, and interrupt information
The HBA Collect utility also provides reports about the following:
Kernel defaults
Installed RPMs
Loaded kernel modules loaded
Running processes
Open files
GO BACK TO
PREVIOUS
SCREEN
Return to the main menu.
QUIT Exit the menu interface.
Table 8-14. Select Host to Scan Menu (Continued)
Option Description
To Next Page
Loading...
Need help?
General