6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment
6-22 FE0254601-00 A
4. In the Host Level Info & Operations menu, type 2 and press ENTER to
select Install/Update VLAN/Teaming Driver, All Adapters (Figure 6-16).
Figure 6-16. Host Level Info & Operations Menu
5. At the prompt, Do you want to use external source for
VLAN/Teaming driver?, choose one of the following (Figure 6-17):
No—Installs the VLAN/teaming driver bundled with the
QConvergeConsole CLI.
Yes—Specifies the path to the zip file containing the QLogic
VLAN/teaming driver.
Figure 6-17. Installing VLAN Teaming Driver
6. The current VLAN/teaming driver version and the version to be installed are
displayed. If this is correct, enter Yes to proceed with the installation.
7. When the QLogic VLAN/teaming driver installation is complete, type 8 and
press ENTER to return to the main Interactive Menu.
To Next Page
Loading...