Qlogic 8100 Series

6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment
FE0254601-00 A 6-19
Figure 6-13. Creating a Team
10. After successfully creating a team, a new logical interface appears in the
Microsoft Windows Network Connections window as shown in Figure 6-14.
Figure 6-14. Logical Interface—QLogic VT-IM Miniport Driver
NOTE:
Ports that have a VLAN ID assigned to them are not available to be
team members. Remove VLAN IDs from a port to allow membership.
For more information, refer to “VLAN Configuration” on page 6-52.