Qlogic 8100 Series User Manual

4–Installation in a Linux Environment
Management Tool Installation
FE0254601-00 A 4-27
 Linux Network Interface Configuration Tools—A set of tools, including
ifconfig and neat, that configure parameters such as IP address and
network interface status. For more information about these tools, refer
to the tool manual pages.
Obtaining the QLogic Adapter Management Tools
To download the QLogic management tools and documentation:
1. Go to the QLogic Web site: http://driverdownloads.qlogic.com
.
2. Click QLogic Products.
3. Click Adapters.
4. In the selection list, click Converged Network Adapters in the first column.
5. In the selection list, click on the adapter model number in the second
column.
6. In the third column, click the Linux operating system that is installed on the
server, and then click Go.
7. Under Management Tools, click the download link for the QLogic
management application that you want, including the Readme and Release
Note files (Figure 4-19). Save the files to a temporary location on the hard
drive.
Figure 4-19. Download Linux Adapter Management Tools
8. To download the related management tool documentation, click on the
corresponding document link under Documentation.

Qlogic 8100 Series Specifications

General

Brand	Qlogic
Model	8100 Series
Category	Network Card
Language	English