5–Installation in a VMware Environment
Deploying NPIV for VMware ESX/ESXi 4.0
5-30 FE0254601-00 A
5. Proceed through the configuration procedure (Name and Location,
Datastore, Virtual Machine Version, Guest Operating System, CPUs,
Memory, Network, SCSI Controller) as you would for any non-NPIV virtual
machine.
6. Select a disk. In this example, click Raw Device Mappings, and then click
Next (Figure 5-39).
Figure 5-39. Create New Virtual Machine—Select a Disk
To Next Page
Loading...