9–Offline Utilities
EFIUTIL
9-16 FE0254601-00 A
The script updates the multi-boot images for all the QLogic adapters with
corresponding multi-boot image versions, as shown in Figure 9-9.
Figure 9-9. FlasUTIL FW Upgrade In Progress
4. When the installation is complete, reboot the system.
EFIUTIL
The EFIUTIL utility accesses and modifies the contents of the Flash memory on
the QLogic adapter. This utility is an EFI/UEFI application runs from the EFI shell.
It consists of the program efiutil.efi and an auxiliary driver, efiaux.drv.
The auxiliary driver is used if efiutil.efi is unable to detect a QLogic EFI
driver capable of supporting the Flash memory protocol. All these files must be in
the same directory with efiutil.efi.
There are two versions of EFIUTIL: efiutil.efi and efiutilx64.efi.
efiutil.efi runs on Itanium processor (IA64) systems. efiutilx64.efi
runs on x64 processor systems.
NOTE:
Each multi-boot image version has its own update.bat file. Do not
attempt to update a multi-boot image with an update.bat file from a
different multi-boot image version.
To Next Page
Loading...
Need help?
General