9–Offline Utilities
EFIUTIL
FE0254601-00 A 9-17
The utility can run in batch mode or in interactive mode (CLI mode). The mode of
operation is determined by the number command line parameters used to start
efiutil. If no parameters are used, EFIUTIL starts in CLI mode as follows:
To start the EFIUTIL CLI on an IA64 system, type the following command:
efiutil
To start the EFIUTIL CLI on an x64 system, type the following command:
efiutilx64
For information about the EFIUTIL commands and menus, refer to Using the
Efiutil Utility, in the software package.
To Next Page
Loading...
Need help?
General