9–Offline Utilities
Fast!UTIL
9-8 FE0254601-00 A
Restore Default Settings
The Restore Default Settings option restores the default adapter and NVRAM
settings. The NVRAM settings are the adapter settings that were saved the last
time NVRAM was updated using the QLogic FlasUTIL utility (option u). If NVRAM
has not been updated using the FlasUTIL utility since the adapters were installed,
the factory settings are restored.
Raw NVRAM Data
The Raw NVRAM Data option displays raw NVRAM data for QLogic Technical
Support to use.
Advanced Adapter Settings
The Advanced Adapter Settings option opens the Advanced Adapter Settings
window (Figure 9-7), from which you can view and modify advanced adapter
parameters. Modify these parameters only if you are an advanced user or if you
have been instructed by QLogic Technical Support.
Figure 9-7. Advanced Adapter Settings Window
Table 9-3 describes the parameters in the Advanced Adapters Settings window.
NOTE:
On some servers, the BIOS code supports selectable startup that overrides
the Fast!UTIL selectable boot setting. In such cases, consult the server
product documentation for information about configuring the boot device
using the server’s Configuration/Setup Utility menu.
To Next Page
Loading...
Need help?
General