5–Installation in a VMware Environment
Installing the FCoE and Networking Drivers
FE0254601-00 A 5-7
13. Change to the directory that contains the driver ISO files by issuing the
following command:
# cd /vmfs/volumes/Storage1/<esxconsole>/temp
14. Mount the first ISO file under the ESX host server by issuing the following
command:
# mount -o loop –t iso9660 <network driver file>.iso
/mnt/cdrom
15. Change to the directory that contains the zip files from the mounted ISO
image by issuing the following command:
# cd /mnt/cdrom/offline-bundle
16. Install the driver by issuing the following command:
# esxupdate --bundle=<network driver file>.zip update
17. Go back to the directory that contains the ISO files by issuing the following
command:
# cd /vmfs/volumes/Storage1/<esxconsole>/temp
18. Unmount the first ISO file from the ESX host server by issuing the following
command:
# umount /mnt/cdrom
19. Repeat Steps 12 and 13 for the second driver:
20. Mount the second ISO file under the ESX host server by issuing the
following command:
# mount -o loop –t iso9660 <fcoe driver file>.iso /mnt/cdrom
21. Change to the directory that contains the zip files from the mounted ISO
image by issuing the following command:
# cd /mnt/cdrom/offline-bundle
22. Install the driver by issuing the following command:
# esxupdate --bundle=<fcoe driver file>.zip update
23. Go back to the directory that contains the ISO files by issuing the following
command:
# cd /vmfs/volumes/Storage1/<esxconsole>/temp
To Next Page
Loading...
Need help?
General