Quantronix CubiScan 110 - Measure

CubiScan 110 Command Set Communications Protocol
58 CubiScan 110
Measure
Receipt of this command causes the CubiScan to measure and
weigh the package in the measuring field. The CubiScan immedi-
ately formats the data collected and transmits it to the host com-
puter.
4 1 End of Text Control (ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
6 1 Line Feed Control (LF) 0Ah
Pos Len Description Type Range ASCII
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Measure Command Alpha (M) 4Dh
3 1 End of Text Control (ETX) 03h
4 1 Carriage Return Control (CR) 0Dh
5 1 Line Feed Control (LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Measure Command Alpha (M) 4Dh
3 1 Acknowledge Alpha (A) 41h
4 1 CubiScan/Host Originated Alpha (C/H) 43h or 48h
5 6 City Code Alpha 000000-ZZZZZZ
11 1 Comma Alpha (,) 2Ch
12 1 Length Identifier Alpha (L) 4C
13 5 Length Numeric 000.0-999.9*
18 1 Comma Alpha (,) 2Ch
19 1 Width Identifier Alpha (W) 57h