CubiScan 110 1
Chapter 1
Product Description
The CubiScan® 110 is a precision volume measuring and weighing
instrument for use in applications in which precise weighing and
measuring is required.
The CubiScan 110 design is unique because it combines parcel
dimensional measuring and weighing into one operation. The col-
lected data are formatted and transmitted to a PC computer or multi-
plexor via the CubiScan 110 RS-232-C serial port. The CubiScan
110 may also be interfaced with other host systems via a standard
10-BaseT Ethernet TCP/IP port (contact Quantronix for details).
The collected data are also displayed on the control panel.
The CubiScan 110 has four sensors (ultrasonic transducers) that
determine the length, width, and height of an object placed on its
measuring surface. The object is simultaneously weighed by a preci-
sion aluminum load cell. The load cell and sensors are controlled by
a proprietary Quantronix controller. The controller, load cell, and
support circuitry are located in the base of the CubiScan 110.
The CubiScan 110 has been designed for use in industrial environ-
ments. The load cell, frame, and sensor housings are made of forged
and machined aluminum.
The CubiScan 110 is easy to set up, operate, and maintain. Its sim-
ple design and extreme accuracy coupled with intelligent, self-con-
tained circuitry make the CubiScan 110 a valuable weighing/mea-
suring tool.
To Next Page
Loading...
Need help?
General
