CubiScan 110 39
Chapter 5
Maintenance
This chapter provides information on the care and maintenance of
the CubiScan 110. Routine maintenance and careful handling will
help keep the CubiScan 110 in good operating condition and prevent
service calls or repairs.
Precautions
Do not put packages on the platform that are known to be over 100
pounds (45 kg). All objects, especially heavy ones, should be placed
on the platform gently. Shock loading will occur if an object is
dropped or thrown onto the platform. This puts unnecessary and
potentially damaging pressure on the load cell.
The CubiScan has been designed to accept overload without dam-
age. However, rough handling and abuse, over time, can cause dam-
age to the load cell. In addition, severe shock loading can cause per-
manent zero shift, making the scale inoperable.
Cleaning the Sensors
The sensors should be kept clean. While dust normally won't inter-
fere with sensor operation, they should be cleaned routinely to pre-
To Next Page
Loading...
Need help?
General
