EasyManuals Logo

Quantum Trinity F90+ User Manual

Quantum Trinity F90+
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
155
Trinity F90+ user manual
AIRSPEED ERROR An airspeed sensor error occurred during the
preight check or during the transition.
Possible reasons are a transition with tail wind or
a blocked airspeed sensor tube.
During preight check:
1. Disconnect the battery from the UAV and connect it again.
2. Turn on the UAV again.
During transition:
1. The transition is aborted.
2. The UAV will return home and land automaticaly.
3. For Trinity F90+ from serialnumber 00686: Please perform the airspeed
sensor cleaning according to chapter 13.6
4. For Trinity F90+ (other): Please contact your reseller.
AIRSPEED
INITIALIZATION ERROR
Sensor init error during startup
Disconnect the battery from the UAV and connect it again.
AIRSPEED SENSOR
MALFUNCTION
The airspeed sensor does not work
correctly
No manual input necessary except for collision avoidance.
1. The UAV will return home and land automatically.
2. The mission cannot be continued.
2. The mission cannot be continued.
3. For Trinity F90+ from serialnumber 00686:Please perform the airspeed
sensor cleaning according to chapter 13.6
4. For Trinity F90+ (other): Please contact your reseller.
ASSISTED FLIGHT The UAV is controlled manually in assisted
mode.
Control the UAV according to the commands of the assisted mode (see chapter
9.1) or select CONT to switch to automatic mode.
AUTOPILOT INFO
ERROR
Autopilot conguration error. Contact your reseller.
BARO ERROR A baro sensor error occurred during the pref-
light check.
1. Disconnect the battery from the UAV and connect it again.
2. Turn on the UAV again.
3. Repeat the preight check.
BARO
INITIALIZATION ERROR
Sensor Init Error during Startup
Disconnect the battery from the UAV and connect it again.
BATTERY CRITICAL During preight check: The remaining battery
capacity is below minimum.
During ight: The remaining capacity is needed
to return and to land.
No manual input necessary except for collision avoidance.
The UAV will return home and land automatically.
The mission cannot be continued.
BATTERY LOW
A warning 10 minutes before the
UAV will return home due to low battery capacity.
Please select COME HOME.
Troubleshooting
14

Table of Contents

Other manuals for Quantum Trinity F90+

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quantum Trinity F90+ and is the answer not in the manual?

Quantum Trinity F90+ Specifications

General IconGeneral
BrandQuantum
ModelTrinity F90+
CategoryAircrafts
LanguageEnglish