RADWAG MA X2.IC.A Series User Manual

- 113 -
If value greater than the permissible high limit is given, then BEEP sound is operated for the
maximum permissible amount of time.
Example:
Command:
BP_350<CR><LF>
- activate BEEP for 350 ms
Response:
BP_OK<CR><LF>
- BEEP activated
CAUTION:
BEEP sound activated via BP command is inhibited if in-course of its activation the sound is
activated by means of other device: keypad, touch panel, proximity sensors.
Send all implemented commands
Format: PC CR LF
Command:
PC CR LF
- send all implemented commands
Response:
PC_A
_”Z,T,S,SI…”
- command carried out, the indicator sent all
implemented commands.
Give moisture analyzer type
Format: BN <CR><LF>
Response options:
BN_A_”x” <CR><LF>
- command understood, response: moisture analyzer type
BN_I <CR><LF>
- command understood but not accessible at this moment
x - moisture analyzer type (inserted in between inverted commas), with general moisture
analyzer type in front
Example:
Command:
BN <CR><LF>
- Return moisture analyzer type
Response:
BN_A_”AS”
- Moisture analyzer type: ”AS R”
Give max capacity
Format:
FS <CR><LF>
Response options:
FS_A_”x” <CR><LF>
- command understood, response: Max capacity
FS_I <CR><LF>
- command understood but not accessible at this moment
x
- Max value of reading units (in between inverted commas)
Example:
Command:
FS <CR><LF>
- Return Max capacity
Response:
FS_A_”220.0000”
- Max capacity: ”220 g”
Give program version
Format:
RV <CR><LF>
Response options:
RV_A_”x” <CR><LF>
- command understood, response: program version
RV_I <CR><LF>
- command understood but not accessible at this moment
x
- program version (in between inverted commas)
Example:
Command:
RV <CR><LF>
- return program version
Response:
RV_A_” 1.1.1”
- program version: ”1.1.1”
Set AUTOZERO Function
Format:
A_n <CR><LF>
Response options:

RADWAG MA X2.IC.A Series Specifications

General

Brand	RADWAG
Model	MA X2.IC.A Series
Category	Measuring Instruments
Language	English