RADWAG MA X2.IC.A Series User Manual

- 116 -
Response:
ARS_OK<CR><LF>
- fast+reliable option set
Give current value release setting
Command overview:
Command gives information about current value release setting.
Format: ARG <CR><LF>
Response options:
ARG_x_OK<CR><LF>
- command carried out, response: current value release
setting
ARG_I <CR><LF>
- command understood but not accessible at this
moment
x - parameter, symbol of current value release setting
Example:
Command:
ARG<CR><LF>
- give current value release setting
Response:
ARG_2_OK<CR><LF>
- current value release setting: fast+reliable
Set last digit
Format: LDS_n <CR><LF>
Response options:
LDS_OK<CR><LF>
- command carried out
LDS_E <CR><LF>
- error in-course of command execution, no parameter or incorrect
format
LDS_I <CR><LF>
- command understood but not accessible at this moment
n - parameter, decimal value determining last digit settings
n → 1 – always
2 – never
3 – when stable
CAUTION:
The numbering is assigned to a particular last digit option and it is identical for all moisture
analyzer types.
If for a particular moisture analyzer type, last digit settings are assigned to a working mode,
the command changes the current mode's settings.
Example:
Command:
LDS_1<CR><LF>
- set last digit option to value ‘always’
Response:
LDS_OK<CR><LF>
- ‘always’ value set
Operator logging
Format: LOGIN_Name, Password CR LF where: _ - space
(enter name and password in a form provided by the moisture analyzer – lower-case letters
and upper-case letters)
Response options:
LOGIN OK CR LF
- command understood, new operator logged in
LOGIN ERROR CR LF
- command understood, an error in name or password occurred,
log in failed
ES CR LF
-
command not recognized (error in format)
Operator logout
Format: LOGOUT CR LF
Response options:
LOGOUT OK CR LF
- command understood, user is logged out

RADWAG MA X2.IC.A Series Specifications

General

Brand	RADWAG
Model	MA X2.IC.A Series
Category	Measuring Instruments
Language	English