RADWAG MA X2.IC.A Series

- 117 -
ES CR LF
- command not recognized (error in format)
Give set profile name
Format: PRG CR LF
Response options:
PRG_A_”x” CR LF
- command understood, response: profile name
PRG_I CR LF
- command understood but not accessible at this moment
x - profile name (in between inverted commas)
Example:
Command:
PRG CR LF - give profile name
Response:
PRG _A_”Fast” – profile name –-”Fast”
Profile selection
Format: PROFILE_Name CR LF
where: _ - space (enter name in a form provided by the moisture analyzer – lower-case
letters and upper-case letters, spaces; e.g. Fast; Fast dosing, User, Precision).
Response options:
PROFILE OK CR LF
- command understood, new profile set
LOGIN ERROR CR LF
- command understood, an error in name, profile setting impossible
ES CR LF
- command not recognized (error in format)
Give set profile name
Format: PRG CR LF
Response options:
PRG_A_”x” CR LF
- command understood, response: profile name
PRG_I CR LF
- command understood but not accessible at this moment
x - profile name (in between inverted commas)
Example:
Command:
PRG CR LF - give profile name
Response:
PRG _A_”Fast” – profile name –-”Fast”
Profile selection
Format: PROFILE_Name CR LF
where: _ - space (enter name in a form provided by the moisture analyzer – lower-case
letters and upper-case letters, spaces; e.g. Fast; Fast dosing, User, Precision).
Response options:
PROFILE OK CR LF
- command understood, new profile set
LOGIN ERROR CR LF
- command understood, an error in name, profile setting impossible
ES CR LF
- command not recognized (error in format)